Label Material for Wine & Spirit Bottles

FAQ

Where do Wine & Spirit Bottle Labels label jobs most often go wrong?

Three failures repeat on glass wine and spirit bottles: condensation forms on a bottle taken out of a 6 °C cellar; the label has to sit flat across the shoulder, not just the body; ice-bucket immersion softens a paper face within minutes.

What combination works for Wine & Spirit Bottle Labels — paper, film, or both?

In this field the catalogue concentrates on Others, PP Film, Woodfree Paper: 11 of the 11 constructions here use one of those faces, and Hot Melt is the most frequent adhesive. That pairing is chosen for condensation and a curved shoulder.

What paperwork can you supply for Wine & Spirit Bottle Labels labels?

Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.

What roll format and line speed does Wine & Spirit Bottle Labels material run at?

Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.

What MOQ applies to Wine & Spirit Bottle Labels labels?

The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.

What is the step-by-step for approving Wine & Spirit Bottle Labels material?

Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.