Label Material for Electronics & Asset Tracking

FAQ

Why do Electronics & Asset Labels labels lift in service, and what usually causes it?

Three failures repeat on anodised aluminium and powder-coated panels: powder-coated and anodised panels are low-energy and often textured; the label has to survive 85 °C / 85 % RH damp heat; small asset labels lift at the radius where the die cut is tightest.

Which face stock and adhesive should we specify for Electronics & Asset Labels?

In this field the catalogue concentrates on PET Film, Copperplate Paper: 12 of the 12 constructions here use one of those faces, and General-purpose is the most frequent adhesive. That pairing is chosen for low-energy panels and damp heat. Anything outside that list is a development item, not a catalogue substitute.

What do we get for our compliance file on Electronics & Asset Labels?

Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.

What line speed should we plan for with Electronics & Asset Labels labels?

Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.

How much Electronics & Asset Labels material do we have to order?

The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.

How does the sampling process work for Electronics & Asset Labels?

Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.