Why do Pharmaceutical Containers labels lift in service, and what usually causes it?

Three failures repeat on small-diameter vials and ampoule cartons: a 10 mm vial gives almost no flat area for the adhesive to grab; die-cutting tolerance matters more than peel strength at that size; an alcohol wipe before labelling attacks an unprotected paper face.

Which face stock and adhesive should we specify for Pharmaceutical Containers?

In this field the catalogue concentrates on Copperplate Paper, Synthetic Paper: 24 of the 24 constructions here use one of those faces, and High-tack is the most frequent adhesive. That pairing is chosen for die-cut precision on a 10 mm vial.

What do we get for our compliance file on Pharmaceutical Containers?

Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.

What line speed should we plan for with Pharmaceutical Containers labels?

Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.

How much Pharmaceutical Containers material do we have to order?

The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.

How does the sampling process work for Pharmaceutical Containers?

Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.

Label Material for Pharmaceutical Containers — 24 Options

What usually decides the choice

For pharmaceutical containers the three variables that most often cause a complaint are substrate surface energy (whether the adhesive can wet out), temperature and moisture at application and in service, and line speed (whether the liner releases cleanly at your press speed). Selecting on face stock alone is where most specification errors start.

FAQ

Why do Pharmaceutical Containers labels lift in service, and what usually causes it?: Three failures repeat on small-diameter vials and ampoule cartons: a 10 mm vial gives almost no flat area for the adhesive to grab; die-cutting tolerance matters more than peel strength at that size; an alcohol wipe before labelling attacks an unprotected paper face.
Which face stock and adhesive should we specify for Pharmaceutical Containers?: In this field the catalogue concentrates on Copperplate Paper, Synthetic Paper: 24 of the 24 constructions here use one of those faces, and High-tack is the most frequent adhesive. That pairing is chosen for die-cut precision on a 10 mm vial.
What do we get for our compliance file on Pharmaceutical Containers?: Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.
What line speed should we plan for with Pharmaceutical Containers labels?: Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.
How much Pharmaceutical Containers material do we have to order?: The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.
How does the sampling process work for Pharmaceutical Containers?: Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.

Label Material for Pharmaceutical Containers

Constructions forPharmaceutical Containers

What usually decides the choice

FAQ

Send us your pharmaceutical containers label brief