80g Premium Coated Paper Pharmaceutical Containers Label Material — A18001

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Coated paper face — excellent print reproduction for fine graphics

FAQ

Would the 62g White Glassine liner on A18001 (80g Premium Coated Paper, Hot Melt) change how it grips small-diameter vials and ampoule cartons, and how do we check that before a full run?

80g Premium Coated Paper is specified for the pharmaceutical containers field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Not recommended for PVC surfaces.

Is there a storage limit on A18001 (80g Premium Coated Paper, Hot Melt) once it sits on a 62g White Glassine liner, and does that hold at our line temperature?

The minimum application temperature is 10 °C and the service range after labelling is -15–65 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

Is the peel value on A18001 (80g Premium Coated Paper, Hot Melt) measured at 20 min dwell, and does the liner change the figure?

Initial tack is ≥17 N by the ball method and 90° peel is ≥9 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

What quantity does A18001 (80g Premium Coated Paper, Hot Melt) start at on a 62g White Glassine liner, and does a trial roll count, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

We used AR0011 before. What changes if we switch to A18001 (80g Premium Coated Paper), and does the price differ much?

A18001 runs Hot Melt adhesive on 62g White Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.