80g Premium Coated Paper HDPE Bottles Label Material — AR0010

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Coated paper face — excellent print reproduction for fine graphics

FAQ

AR0010 (80g Premium Coated Paper): does the Removable adhesive on 60g White Glassine give enough grab at the HDPE bottles and closures edge, and does it still hold on our own substrate?

80g Premium Coated Paper is specified for the hdpe bottles field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Not recommended for curved substrates (strong reaction with removable adhesive); above 70 °C, PMMA/PVC/PET/PP surfaces.

How cold can the line run before the Removable adhesive on AR0010 (80g Premium Coated Paper) stops grabbing, and does that hold at our line temperature?

The minimum application temperature is 10 °C and the service range after labelling is -20–70 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

Does AR0010 (80g Premium Coated Paper, Removable) really measure 4–9 N tack, and on which substrate, and does the liner change the figure?

Initial tack is 4–9 N by the ball method and 90° peel is 1–3.5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

If we order AR0010 in a slit roll of 80g Premium Coated Paper, what is the smallest quantity, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick AR0010 (80g Premium Coated Paper) over AR0011, and is one a drop-in for the other?

The adhesive is the same and the liner differs: AR0010 uses 60g White Glassine Liner, while AR0011 uses 62g White Glassine Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.