80g Premium Coated Paper Pharmaceutical Containers Label Material — AAHT10

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• High-tack adhesive system — strong initial tack, firm bonding, resistant to lifting
• Coated paper face — excellent print reproduction for fine graphics
• Verified by customer mass production

FAQ

Is High-tack adhesive on AAHT10 (80g Premium Coated Paper) enough for small-diameter vials and ampoule cartons, or do we need higher tack, and how do we check that before a full run?

80g Premium Coated Paper is specified for the pharmaceutical containers field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is AAHT10 (80g Premium Coated Paper, High-tack) rated for a cold store, and down to what temperature, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For AAHT10 (80g Premium Coated Paper), what tack and peel should we expect from High-tack adhesive at 23 °C, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Is AAHT10 (80g Premium Coated Paper) kept in stock, or is it produced to order with High-tack adhesive, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick AAHT10 (80g Premium Coated Paper) over AR0011, and is one a drop-in for the other?

AAHT10 runs High-tack adhesive on 36μm Clear PET Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.