Removable Label Material with No Residue

FAQ

Why do Removable & No-Residue labels lift in service, and what usually causes it?

Three failures repeat on glass, furniture and reusable containers: dwell time turns a removable adhesive semi-permanent within weeks; soft PVC and some painted surfaces absorb adhesive and stain; sun through glass takes the surface past 70 °C and the film shrinks.

Which face stock and adhesive should we specify for Removable & No-Residue?

In this field the catalogue concentrates on Copperplate Paper, Synthetic Paper, Thermal Paper: 6 of the 8 constructions here use one of those faces, and Removable is the most frequent adhesive. That pairing is chosen for clean removal after long dwell.

What do we get for our compliance file on Removable & No-Residue?

Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.

What line speed should we plan for with Removable & No-Residue labels?

Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.

How much Removable & No-Residue material do we have to order?

The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.

How does the sampling process work for Removable & No-Residue?

Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.