75μm Synthetic Paper Removable & No-Residue Label Material — F8RG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Will this 75μm Synthetic Paper hold on glass, furniture and reusable containers, and where does it stop working, and which document states that?

75μm Synthetic Paper is specified for the removable & no-residue field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does F8RG31 (75μm Synthetic Paper) survive 60 °C in service, given the Removable adhesive, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 75μm Synthetic Paper and Removable combination report for tack and peel, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How long from purchase order to shipment on F8RG31 (75μm Synthetic Paper, Removable) with a 62g White Glassine liner, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is F10050 a drop-in alternative to F8RG31 (75μm Synthetic Paper), and which holds better at the edge?

F8RG31 runs Removable adhesive on 62g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.