Label Material for Detergent & Daily Chemical Bottles

FAQ

We keep getting edge lift on Detergent & Daily Chemical Bottles — what are the usual causes?

Three failures repeat on HDPE and squeezable detergent bottles: HDPE sits at 30–32 dyn/cm, so a plain acrylic cannot wet out; a squeezable wall flexes and a stiff paper face cracks at the radius; mould-release residue on the shoulder pulls tack down to near zero.

What should we put on the spec sheet for a Detergent & Daily Chemical Bottles label?

In this field the catalogue concentrates on PP Film, PE Film, Synthetic Paper: 52 of the 65 constructions here use one of those faces, and Standard is the most frequent adhesive. That pairing is chosen for flexing walls and low-energy HDPE.

What certificates or documents come with Detergent & Daily Chemical Bottles material?

Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.

Can you slit Detergent & Daily Chemical Bottles material to our core and width?

Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.

Is there a smaller starting quantity for Detergent & Daily Chemical Bottles?

The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.

How long does approval take if we start with a Detergent & Daily Chemical Bottles sample?

Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.