60μm Clear BOPE Film Detergent & Daily Chemical Bottles Label Material — F35601

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces
• Verified by customer mass production

FAQ

What substrates is F35601 (60μm Clear BOPE Film) built for, given it runs a General-purpose adhesive, and how do we check that before a full run?

60μm Clear BOPE Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

How cold can the line run before the General-purpose adhesive on F35601 (60μm Clear BOPE Film) stops grabbing, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the F35601 (60μm Clear BOPE Film, General-purpose) data sheet state its peel condition on a 62g White Glassine liner, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 62g White Glassine liner add lead time to a F35601 (60μm Clear BOPE Film, General-purpose) order, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is B373T0 a drop-in alternative to F35601 (60μm Clear BOPE Film), and which holds better at the edge?

F35601 runs General-purpose adhesive on 62g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.