78μm Bright White PE Film Detergent & Daily Chemical Bottles Label Material — B373T0

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

What does B373T0 (78μm Bright White PE Film, Standard) on a 30μm Clear PET liner need on HDPE and squeezable detergent bottles: primer, corona, or nothing, and what would you send as a sample?

78μm Bright White PE Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does B373T0 (78μm Bright White PE Film) survive 60 °C in service, given the Standard adhesive, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For B373T0 (78μm Bright White PE Film), what tack and peel should we expect from Standard adhesive at 23 °C, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

B373T0 (78μm Bright White PE Film, Standard): what is the shortest lead time you can hold to, and at what quantity, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick B373T0 (78μm Bright White PE Film) over B37861, and is one a drop-in for the other?

B373T0 runs Standard adhesive on 30μm Clear PET Liner, while B37861 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.