85μm Bright White PE Film Edible Oil Barrels Label Material — F32361

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• High-tack adhesive system — strong initial tack, firm bonding, resistant to lifting
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces
• Verified by customer mass production

FAQ

Does F32361 (85μm Bright White PE Film) with High-tack adhesive bond to oil drums and edible-oil barrels without a primer, and which document states that?

85μm Bright White PE Film is specified for the edible oil barrels field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is F32361 (85μm Bright White PE Film, High-tack) rated for a cold store, and down to what temperature, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does F32361 (85μm Bright White PE Film) have with High-tack adhesive, measured to which standard, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 62g White Glassine liner add lead time to a F32361 (85μm Bright White PE Film, High-tack) order, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is B373T0 a drop-in alternative to F32361 (85μm Bright White PE Film), and which one should we trial first?

F32361 runs High-tack adhesive on 62g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.