85μm Bright White PE Film (UV coating) Detergent & Daily Chemical Bottles Label Material — F35610

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Medium-tack adhesive system — balanced adhesion and converting performance
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

F35610 (85μm Bright White PE Film (UV coating)): does the Medium-tack adhesive on 60g White Glassine give enough grab at the HDPE and squeezable detergent bottles edge, and how do we check that before a full run?

85μm Bright White PE Film (UV coating) is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Can F35610 (85μm Bright White PE Film (UV coating), Medium-tack) be applied at 60 °C on the line, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 85μm Bright White PE Film (UV coating) and Medium-tack combination report for tack and peel, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Is F35610 (85μm Bright White PE Film (UV coating)) kept in stock, or is it produced to order with Medium-tack adhesive, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F35610 (85μm Bright White PE Film (UV coating)) over B373T0, and is one a drop-in for the other?

F35610 runs Medium-tack adhesive on 60g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.