60μm Bright White BOPP Film Detergent & Daily Chemical Bottles Label Material — F15501

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Medium-tack adhesive system — balanced adhesion and converting performance
• Pearl BOPP face — good stiffness, bright appearance, crease resistant

FAQ

Can we apply F15501 (60μm Bright White BOPP Film, Medium-tack) to HDPE and squeezable detergent bottles straight off the roll, and does the liner change the answer?

60μm Bright White BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

How cold can the line run before the Medium-tack adhesive on F15501 (60μm Bright White BOPP Film) stops grabbing, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for F15501 (60μm Bright White BOPP Film, Medium-tack), and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

F15501 (60μm Bright White BOPP Film, Medium-tack): what is the shortest lead time you can hold to, and at what quantity, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F15501 (60μm Bright White BOPP Film) compare with F11801 on HDPE and squeezable detergent bottles, and which holds better at the edge?

F15501 runs Medium-tack adhesive on 62g White Glassine Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.