80μm Bright White PE Film Detergent & Daily Chemical Bottles Label Material — F37T40

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

Is Low-odor / Residue-free adhesive on F37T40 (80μm Bright White PE Film) enough for HDPE and squeezable detergent bottles, or do we need higher tack, and which document states that?

80μm Bright White PE Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does the 30μm Clear PET liner on F37T40 (80μm Bright White PE Film, Low-odor / Residue-free) change how it behaves when applied cold, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for F37T40 (80μm Bright White PE Film, Low-odor / Residue-free), and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

F37T40 (80μm Bright White PE Film, Low-odor / Residue-free): what is the shortest lead time you can hold to, and at what quantity, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F37T40 (80μm Bright White PE Film) over B373T0, and can we get both as samples?

F37T40 runs Low-odor / Residue-free adhesive on 30μm Clear PET Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.