75μm Synthetic Paper Detergent & Daily Chemical Bottles Label Material — F80830

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Where does F80830 (75μm Synthetic Paper, Low-odor / Residue-free) fail first on HDPE and squeezable detergent bottles, and does it still hold on our own substrate?

75μm Synthetic Paper is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What is the minimum application temperature for F80830 (75μm Synthetic Paper, Low-odor / Residue-free) on a 30μm Clear PET liner, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Which standard are the tack and peel values for 75μm Synthetic Paper on 30μm Clear PET reported to, and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Do we have to take a full production lot of F80830 (75μm Synthetic Paper), or can Low-odor / Residue-free codes be pooled, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F80830 (75μm Synthetic Paper) compare with F10050 on HDPE and squeezable detergent bottles, and does the price differ much?

The adhesive is the same and the liner differs: F80830 uses 30μm Clear PET Liner, while F10050 uses 36μm Clear PET Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.