50μm Bright Silver BOPP Film (inner metallised) Detergent & Daily Chemical Bottles Label Material — FL6710

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• PP film face — balanced stiffness and weather resistance

FAQ

Would 50μm Bright Silver BOPP Film (inner metallised) on a 60g White Glassine liner be the right call for HDPE and squeezable detergent bottles, and which document states that?

50μm Bright Silver BOPP Film (inner metallised) is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

FL6710 (50μm Bright Silver BOPP Film (inner metallised), Standard) in a 60 °C plant: what application window should we plan for, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does FL6710 (50μm Bright Silver BOPP Film (inner metallised)) have with Standard adhesive, measured to which standard, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What is the minimum order quantity and lead time for FL6710 (50μm Bright Silver BOPP Film (inner metallised), Standard), and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

We used F41771 before. What changes if we switch to FL6710 (50μm Bright Silver BOPP Film (inner metallised)), and is one a drop-in for the other?

The adhesive is the same and the liner differs: FL6710 uses 60g White Glassine Liner, while F41771 uses 62g White Glassine Liner. Changing the liner shifts release force and die-cutting behaviour, and the price moves with it. Compare the two technical tables above, then test both on the same substrate.