50μm Clear BOPP Film Detergent & Daily Chemical Bottles Label Material — F47801

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• PP film face — balanced stiffness and weather resistance

FAQ

What substrates is F47801 (50μm Clear BOPP Film) built for, given it runs a General-purpose adhesive, and does it still hold on our own substrate?

50μm Clear BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

At what temperature do we apply F47801 (50μm Clear BOPP Film, General-purpose), and what can it take afterwards, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Can you give tack and peel for F47801 (50μm Clear BOPP Film, General-purpose) in N rather than a vague high-tack claim, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How long from purchase order to shipment on F47801 (50μm Clear BOPP Film, General-purpose) with a 80g White Glassine liner, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F47801 (50μm Clear BOPP Film) and F41771, and which holds better at the edge?

F47801 runs General-purpose adhesive on 80g White Glassine Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.