75μm Synthetic Paper Detergent & Daily Chemical Bottles Label Material — F75600

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Is 75μm Synthetic Paper the right face for HDPE and squeezable detergent bottles, or do we need a film instead, and does it still hold on our own substrate?

75μm Synthetic Paper is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does F75600 (75μm Synthetic Paper) survive 60 °C in service, given the General-purpose adhesive, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does F75600 (75μm Synthetic Paper) have with General-purpose adhesive, measured to which standard, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to F75600 (75μm Synthetic Paper) with General-purpose adhesive, and what is the lead time after approval, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F75600 (75μm Synthetic Paper) over F10050, and which one should we trial first?

F75600 runs General-purpose adhesive on 60g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.