50μm Bright Silver BOPP Film (surface metallised) Detergent & Daily Chemical Bottles Label Material — FP6300

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PP film face — balanced stiffness and weather resistance

FAQ

What substrates is FP6300 (50μm Bright Silver BOPP Film (surface metallised)) built for, given it runs a Low-odor / Residue-free adhesive, and what would you send as a sample?

50μm Bright Silver BOPP Film (surface metallised) is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does FP6300 (50μm Bright Silver BOPP Film (surface metallised), Low-odor / Residue-free) need a slower speed to wet out, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does FP6300 (50μm Bright Silver BOPP Film (surface metallised)) have with Low-odor / Residue-free adhesive, measured to which standard, and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 30μm Clear PET liner add lead time to a FP6300 (50μm Bright Silver BOPP Film (surface metallised), Low-odor / Residue-free) order, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is F41771 a drop-in alternative to FP6300 (50μm Bright Silver BOPP Film (surface metallised)), and which one should we trial first?

FP6300 runs Low-odor / Residue-free adhesive on 30μm Clear PET Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.