50μm Clear PP Film Detergent & Daily Chemical Bottles Label Material — FS4840

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PP film face — balanced stiffness and weather resistance
• Verified by customer mass production

FAQ

Does FS4840 (50μm Clear PP Film) with Water-resistant adhesive bond to HDPE and squeezable detergent bottles without a primer, and does the liner change the answer?

50μm Clear PP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does FS4840 (50μm Clear PP Film) survive 60 °C in service, given the Water-resistant adhesive, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does FS4840 (50μm Clear PP Film) have with Water-resistant adhesive, measured to which standard, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Can we start with less than a full run of FS4840 (50μm Clear PP Film, Water-resistant), and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick FS4840 (50μm Clear PP Film) over F41771, and which one should we trial first?

FS4840 runs Water-resistant adhesive on 65g Blue Glassine Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.