85μm Bright White PE Film Detergent & Daily Chemical Bottles Label Material — F3CG65

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• PE film face — soft and conformable, ideal for squeezable bottles and curved surfaces

FAQ

What does F3CG65 (85μm Bright White PE Film, General-purpose) on a 62g White Glassine liner need on HDPE and squeezable detergent bottles: primer, corona, or nothing, and does it still hold on our own substrate?

85μm Bright White PE Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. PE film is soft and conforms to squeezable and curved bottles. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does F3CG65 (85μm Bright White PE Film, General-purpose) need a slower speed to wet out, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Can you give tack and peel for F3CG65 (85μm Bright White PE Film, General-purpose) in N rather than a vague high-tack claim, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How much F3CG65 (85μm Bright White PE Film, General-purpose) on a 62g White Glassine liner do we have to order, and how long does it take, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

We used B373T0 before. What changes if we switch to F3CG65 (85μm Bright White PE Film), and can we get both as samples?

F3CG65 runs General-purpose adhesive on 62g White Glassine Liner, while B373T0 runs Standard on 30μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.