60μm Bright White BOPP Film Detergent & Daily Chemical Bottles Label Material — F11870

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Pearl BOPP face — good stiffness, bright appearance, crease resistant

FAQ

What substrates is F11870 (60μm Bright White BOPP Film) built for, given it runs a Standard adhesive, and which document states that?

60μm Bright White BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is there a storage limit on F11870 (60μm Bright White BOPP Film, Standard) once it sits on a 60g White Glassine liner, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the F11870 (60μm Bright White BOPP Film, Standard) data sheet state its peel condition on a 60g White Glassine liner, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to F11870 (60μm Bright White BOPP Film) with Standard adhesive, and what is the lead time after approval, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F11870 (60μm Bright White BOPP Film) compare with F11801 on HDPE and squeezable detergent bottles, and which one should we trial first?

F11870 runs Standard adhesive on 60g White Glassine Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.