70g Premium Woodfree Paper Removable & No-Residue Label Material — WR0011

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Woodfree paper face — good for writing and printing

FAQ

Would the 62g White Glassine liner on WR0011 (70g Premium Woodfree Paper, Removable) change how it grips glass, furniture and reusable containers, and does it still hold on our own substrate?

70g Premium Woodfree Paper is specified for the removable & no-residue field, which does not mean every substrate in it. Uncoated woodfree takes pen and stamp, and it is the least water-resistant face in the range. Not recommended for curved substrates (strong reaction with removable adhesive); above 70 °C, PMMA/PVC/PET/PP surfaces.

Is WR0011 (70g Premium Woodfree Paper, Removable) rated for a cold store, and down to what temperature, and does that hold at our line temperature?

The minimum application temperature is 10 °C and the service range after labelling is -20–70 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

Which standard are the tack and peel values for 70g Premium Woodfree Paper on 62g White Glassine reported to, and what substrate was it measured on?

Initial tack is 4–9 N by the ball method and 90° peel is 1–3.5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

What MOQ applies to WR0011 (70g Premium Woodfree Paper) with Removable adhesive, and what is the lead time after approval, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick WR0011 (70g Premium Woodfree Paper) over W4MG31, and does the price differ much?

WR0011 runs Removable adhesive on 62g White Glassine Liner, while W4MG31 runs Hot Melt on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.