54μm Synthetic Paper Pharmaceutical Containers Label Material — F9CG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive, stable tack and batch-to-batch consistency
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

What does F9CG31 (54μm Synthetic Paper, Standard) on a 62g White Glassine liner need on small-diameter vials and ampoule cartons: primer, corona, or nothing, and does it still hold on our own substrate?

54μm Synthetic Paper is specified for the pharmaceutical containers field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does F9CG31 (54μm Synthetic Paper, Standard) need a slower speed to wet out, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Can you give tack and peel for F9CG31 (54μm Synthetic Paper, Standard) in N rather than a vague high-tack claim, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

If we order F9CG31 in a slit roll of 54μm Synthetic Paper, what is the smallest quantity, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F9CG31 (54μm Synthetic Paper) and F10050, and can we get both as samples?

F9CG31 runs Standard adhesive on 62g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.