80g Coated Paper Pharmaceutical Containers Label Material — A8SG30

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Medium-tack adhesive system — balanced adhesion and converting performance
• Coated paper face — excellent print reproduction for fine graphics

FAQ

Would the 60g White Glassine liner on A8SG30 (80g Coated Paper, Medium-tack) change how it grips small-diameter vials and ampoule cartons, and which document states that?

80g Coated Paper is specified for the pharmaceutical containers field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to A8SG30 (80g Coated Paper) below 60 °C with this Medium-tack adhesive, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Do the peel figures for A8SG30 (80g Coated Paper, Medium-tack) change with the 60g White Glassine liner, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How many square metres of A8SG30 in 80g Coated Paper makes a minimum run, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does A8SG30 (80g Coated Paper) compare with AR0011 on small-diameter vials and ampoule cartons, and is one a drop-in for the other?

A8SG30 runs Medium-tack adhesive on 60g White Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.