38μm Matte Silver PET Film Electronics & Asset Labels Label Material — D3CG71

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• PET film face — dimensional stability and good heat resistance
• Verified by customer mass production

FAQ

D3CG71 (38μm Matte Silver PET Film): does the General-purpose adhesive on 80g White Glassine give enough grab at the anodised aluminium and powder-coated panels edge, and does it still hold on our own substrate?

38μm Matte Silver PET Film is specified for the electronics & asset field, which does not mean every substrate in it. PET film holds its dimensions and stiffness at higher temperatures than PP or PE. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What service temperature range applies to D3CG71 (38μm Matte Silver PET Film) with General-purpose adhesive, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for D3CG71 (38μm Matte Silver PET Film, General-purpose), and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 80g White Glassine liner add lead time to a D3CG71 (38μm Matte Silver PET Film, General-purpose) order, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is D57631 a drop-in alternative to D3CG71 (38μm Matte Silver PET Film), and is one a drop-in for the other?

D3CG71 runs General-purpose adhesive on 80g White Glassine Liner, while D57631 runs Low-temperature on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.