95μm Pearl Synthetic Paper Edible Oil Barrels Label Material — F17031

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Is Standard adhesive on F17031 (95μm Pearl Synthetic Paper) enough for oil drums and edible-oil barrels, or do we need higher tack, and what would you send as a sample?

95μm Pearl Synthetic Paper is specified for the edible oil barrels field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does F17031 (95μm Pearl Synthetic Paper, Standard) need a slower speed to wet out, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 95μm Pearl Synthetic Paper and Standard combination report for tack and peel, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

If we order F17031 in a slit roll of 95μm Pearl Synthetic Paper, what is the smallest quantity, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is F10050 a drop-in alternative to F17031 (95μm Pearl Synthetic Paper), and which one should we trial first?

F17031 runs Standard adhesive on 62g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.