50μm Clear BOPP Film Office & Stationery Label Material — F41301

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• PP film face — balanced stiffness and weather resistance

FAQ

Would the 62g White Glassine liner on F41301 (50μm Clear BOPP Film, Hot Melt) change how it grips paper, card and file folders, and does it still hold on our own substrate?

50μm Clear BOPP Film is specified for the office & stationery field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

At what temperature do we apply F41301 (50μm Clear BOPP Film, Hot Melt), and what can it take afterwards, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 50μm Clear BOPP Film and Hot Melt combination report for tack and peel, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How long from purchase order to shipment on F41301 (50μm Clear BOPP Film, Hot Melt) with a 62g White Glassine liner, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F41301 (50μm Clear BOPP Film) over F41771, and which one should we trial first?

F41301 runs Hot Melt adhesive on 62g White Glassine Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.