We print 50μm Clear BOPP Film on 62g White Glassine — will that hold on HDPE and squeezable detergent bottles, and what would you send as a sample?

50μm Clear BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Not recommended for small diameters, irregular or squeezable bottles.

If our line runs at 60 °C, does F41771 (50μm Clear BOPP Film, Standard) need a slower speed to wet out, and what happens at the low end?

The minimum application temperature is 10 °C and the service range after labelling is -10–80 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.

Is ≥8 N of tack the figure for this 50μm Clear BOPP Film, or a generic class value, and which document states it?

Initial tack is ≥8 N by the ball method and 90° peel is ≥5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.

F41771 (50μm Clear BOPP Film, Standard): what is the shortest lead time you can hold to, and at what quantity, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is F41801 a drop-in alternative to F41771 (50μm Clear BOPP Film), and is one a drop-in for the other?

F41771 and F41801 share the same face, adhesive and liner, and differ only in finishing: Back Printing against Back Printing. Finishing changes press behaviour and unit price, not adhesion. Compare the two technical tables above, then test both on the same substrate.

50μm Clear BOPP Film Detergent & Daily Chemical Bottles Label Material — F41771

Name: 50μm Clear BOPP Film Detergent & Daily Chemical Bottles Label Material
Brand: Boren
SKU: F41771
Price: 0.350 USD
Availability: InStock

50μm Clear BOPP Film self-adhesive label material for Detergent & Daily Chemical Bottles, built on a Standard and 62g White Glassine Liner. Supplied as jumbo roll or slit roll.

★ Verified in mass production Detergent & Daily Chemical Bottles PP Film

Request a quotation Request a sample roll

F41771 50μm Clear BOPP Film self-adhesive label material — face, adhesive and liner construction chart

Product code	F41771
Face material	50μm Clear BOPP Film
Adhesive	Standard (GE201)
Liner	62g White Glassine Liner
Finishing	Back Printing
Roll format	Jumbo roll / slit roll to order

Technical data
Face weight	—
Face thickness	50 μm
Liner weight	60 g/㎡
Liner thickness	53 μm
Initial tack	≥8 N
90° peel	≥5 N/25mm
Min. application temp.	10 ℃
Service temperature	-10–80 ℃
Test method	FINAT FTM 9 (tack, ball method) / FTM 2 (90° peel); cross-checked to GB/T 4852 / GB/T 2792
Test condition	23±2 ℃ / 50±5 % RH
Not recommended for	small diameters, irregular or squeezable bottles

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Face50μm Clear BOPP Film Balanced stiffness

AdhesiveStandard Stable performance

Liner62g White Glassine Liner Flat, stiff, stable release

Product features

Standard water-based adhesive with stable, consistent performance
PP film face — balanced stiffness and weather resistance
Verified by customer mass production

Customer feedback: Verified by customer mass production

Application

Typical use:Standard Water-based Adhesive · Detergent Bottle · Verified in mass production

Typical brief from the buyer:Detergent Bottle Label

This construction belongs to the Detergent & Daily Chemical Bottles application field and uses PP Film as its face stock.

Ordering & supply

Jumbo roll or slit roll, core and width to your specification
Trial roll available for approval on your own press
Batch-to-batch consistency against the approved construction
Consolidated shipment with export documentation from Guangzhou

MOQ & pricing

Minimum order quantity: 500 ㎡
Lead time: 15 day(s) after artwork/roll approval

Unit price		US$0.350 / ㎡

Volume pricing

500 ㎡ and above	US$0.350 / ㎡
2000 ㎡ and above	US$0.332 / ㎡
5000 ㎡ and above	US$0.322 / ㎡

Unit price above is at the minimum order quantity of 500 ㎡. Ex-works Guangzhou; confirmed against your roll format.

Product video

F41771 · 50μm Clear BOPP Film for detergent & daily chemical bottles · short production clip from our converting line · ~40 sec · no audio · 720p

FAQ

We print 50μm Clear BOPP Film on 62g White Glassine — will that hold on HDPE and squeezable detergent bottles, and what would you send as a sample?: 50μm Clear BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Not recommended for small diameters, irregular or squeezable bottles.
If our line runs at 60 °C, does F41771 (50μm Clear BOPP Film, Standard) need a slower speed to wet out, and what happens at the low end?: The minimum application temperature is 10 °C and the service range after labelling is -10–80 °C. Below the minimum the adhesive cannot wet out, and edges lift within hours on a curved wall. Both figures are measured at 23±2 °C / 50±5 % RH, so confirm them with a trial roll on your line.
Is ≥8 N of tack the figure for this 50μm Clear BOPP Film, or a generic class value, and which document states it?: Initial tack is ≥8 N by the ball method and 90° peel is ≥5 N/25 mm after 20 min. Both are measured to FINAT FTM 9 and FTM 2 at 23±2 °C / 50±5 % RH. Peel grows with dwell, so compare the same hold time against your own pull test.
F41771 (50μm Clear BOPP Film, Standard): what is the shortest lead time you can hold to, and at what quantity, and does a slit roll change it?: Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.
Is F41801 a drop-in alternative to F41771 (50μm Clear BOPP Film), and is one a drop-in for the other?: F41771 and F41801 share the same face, adhesive and liner, and differ only in finishing: Back Printing against Back Printing. Finishing changes press behaviour and unit price, not adhesion. Compare the two technical tables above, then test both on the same substrate.