50μm Squeezable Clear BOPP Film Detergent & Daily Chemical Bottles Label Material — F45671

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• PP film face — balanced stiffness and weather resistance

FAQ

Can we apply F45671 (50μm Squeezable Clear BOPP Film, General-purpose) to HDPE and squeezable detergent bottles straight off the roll, and which document states that?

50μm Squeezable Clear BOPP Film is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at 60 °C, does F45671 (50μm Squeezable Clear BOPP Film, General-purpose) need a slower speed to wet out, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does F45671 (50μm Squeezable Clear BOPP Film) have with General-purpose adhesive, measured to which standard, and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How long from purchase order to shipment on F45671 (50μm Squeezable Clear BOPP Film, General-purpose) with a 62g White Glassine liner, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F45671 (50μm Squeezable Clear BOPP Film) over F41771, and which one should we trial first?

F45671 runs General-purpose adhesive on 62g White Glassine Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.