70μm Synthetic Paper Detergent & Daily Chemical Bottles Label Material — F70700

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

F70700 (70μm Synthetic Paper): does the General-purpose adhesive on 60g White Glassine give enough grab at the HDPE and squeezable detergent bottles edge, and which document states that?

70μm Synthetic Paper is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What is the minimum application temperature for F70700 (70μm Synthetic Paper, General-purpose) on a 60g White Glassine liner, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for F70700 (70μm Synthetic Paper, General-purpose), and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Do we have to take a full production lot of F70700 (70μm Synthetic Paper), or can General-purpose codes be pooled, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F70700 (70μm Synthetic Paper) compare with F10050 on HDPE and squeezable detergent bottles, and can we get both as samples?

F70700 runs General-purpose adhesive on 60g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.