75μm Synthetic Paper HDPE Bottles Label Material — F75610

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

What substrates is F75610 (75μm Synthetic Paper) built for, given it runs a Standard adhesive, and does it still hold on our own substrate?

75μm Synthetic Paper is specified for the hdpe bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

We fill at 60 °C — will F75610 (75μm Synthetic Paper, Standard) still wet out, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For F75610 (75μm Synthetic Paper), what tack and peel should we expect from Standard adhesive at 23 °C, and does the liner change the figure?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

F75610 (75μm Synthetic Paper, Standard): what is the shortest lead time you can hold to, and at what quantity, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F75610 (75μm Synthetic Paper) and F10050, and which one should we trial first?

F75610 runs Standard adhesive on 60g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.