75μm Synthetic Paper General Standard Label Material — F75T50

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Where does F75T50 (75μm Synthetic Paper, Standard) fail first on general cartons and rigid containers, and does it still hold on our own substrate?

75μm Synthetic Paper is specified for the general standard field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is there a storage limit on F75T50 (75μm Synthetic Paper, Standard) once it sits on a 30μm Clear PET liner, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for F75T50 (75μm Synthetic Paper, Standard), and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

If we order F75T50 in a slit roll of 75μm Synthetic Paper, what is the smallest quantity, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

We used F10050 before. What changes if we switch to F75T50 (75μm Synthetic Paper), and can we get both as samples?

F75T50 runs Standard adhesive on 30μm Clear PET Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.