75μm Synthetic Paper Beverage & Dairy Bottles Label Material — F82830

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Can we apply F82830 (75μm Synthetic Paper, Removable) to PET and glass beverage bottles straight off the roll, and what would you send as a sample?

75μm Synthetic Paper is specified for the beverage & dairy bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does the 30μm Clear PET liner on F82830 (75μm Synthetic Paper, Removable) change how it behaves when applied cold, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Do the peel figures for F82830 (75μm Synthetic Paper, Removable) change with the 30μm Clear PET liner, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does F82830 (75μm Synthetic Paper, Removable) start at on a 30μm Clear PET liner, and does a trial roll count, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick F82830 (75μm Synthetic Paper) over F10050, and which one should we trial first?

F82830 runs Removable adhesive on 30μm Clear PET Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.