75μm Synthetic Paper Cold Chain & Fresh Food Label Material — F83800

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Does F83800 (75μm Synthetic Paper) with Low-temperature adhesive bond to frozen cartons and chilled packs without a primer, and which document states that?

75μm Synthetic Paper is specified for the cold chain & fresh food field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Not recommended for PVC surfaces; full solid coverage, fine graphics.

Does F83800 (75μm Synthetic Paper, Low-temperature) on 60g White Glassine hold its service range after a week at -18 °C, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Which standard are the tack and peel values for 75μm Synthetic Paper on 60g White Glassine reported to, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does F83800 (75μm Synthetic Paper, Low-temperature) start at on a 60g White Glassine liner, and does a trial roll count, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F83800 (75μm Synthetic Paper) and F10050, and is one a drop-in for the other?

F83800 runs Low-temperature adhesive on 60g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.