75μm Synthetic Paper HDPE Bottles Label Material — F88811

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• High-tack adhesive system — strong initial tack, firm bonding, resistant to lifting
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Is 75μm Synthetic Paper the right face for HDPE bottles and closures, or do we need a film instead, and does the liner change the answer?

75μm Synthetic Paper is specified for the hdpe bottles field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What service temperature range applies to F88811 (75μm Synthetic Paper) with High-tack adhesive, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for F88811 (75μm Synthetic Paper, High-tack), and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does F88811 (75μm Synthetic Paper, High-tack) start at on a 80g White Glassine liner, and does a trial roll count, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does F88811 (75μm Synthetic Paper) compare with F10050 on HDPE bottles and closures, and can we get both as samples?

F88811 runs High-tack adhesive on 80g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.