100g Plain Holographic Film Paper Detergent & Daily Chemical Bottles Label Material — FS1031

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• PP film face — balanced stiffness and weather resistance

FAQ

Is Hot Melt adhesive on FS1031 (100g Plain Holographic Film Paper) enough for HDPE and squeezable detergent bottles, or do we need higher tack, and which document states that?

100g Plain Holographic Film Paper is specified for the detergent & daily chemical bottles field, which does not mean every substrate in it. BOPP film resists moisture and flexes with a squeezable wall instead of cracking. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to FS1031 (100g Plain Holographic Film Paper) below 60 °C with this Hot Melt adhesive, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for FS1031 (100g Plain Holographic Film Paper, Hot Melt), and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Can we start with less than a full run of FS1031 (100g Plain Holographic Film Paper, Hot Melt), and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

How does FS1031 (100g Plain Holographic Film Paper) compare with F41771 on HDPE and squeezable detergent bottles, and which one should we trial first?

FS1031 runs Hot Melt adhesive on 62g White Glassine Liner, while F41771 runs Standard on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.