75g Premium Top-coated Thermal Paper Express & Logistics Waybills Label Material — S21693

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Thermal paper face — direct thermal printing, no ribbon required

FAQ

S21693 (75g Premium Top-coated Thermal Paper): does the Hot Melt adhesive on 58g Yellow Glassine give enough grab at the corrugated cartons and waybill stock edge, and how do we check that before a full run?

75g Premium Top-coated Thermal Paper is specified for the express & logistics waybills field, which does not mean every substrate in it. Direct thermal prints without a ribbon, but heat, sunlight and plasticiser contact keep developing the coating. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is S21693 (75g Premium Top-coated Thermal Paper, Hot Melt) rated for a cold store, and down to what temperature, and does that hold at our line temperature?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

For S21693 (75g Premium Top-coated Thermal Paper), what tack and peel should we expect from Hot Melt adhesive at 23 °C, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to S21693 (75g Premium Top-coated Thermal Paper) with Hot Melt adhesive, and what is the lead time after approval, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between S21693 (75g Premium Top-coated Thermal Paper) and SR0041, and does the price differ much?

S21693 runs Hot Melt adhesive on 58g Yellow Glassine Liner, while SR0041 runs Low-tack Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.