76g Top-coated Thermal Paper Express & Logistics Waybills Label Material — S26741

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Thermal paper face — direct thermal printing, no ribbon required

FAQ

We print 76g Top-coated Thermal Paper on Blue Glassine — will that hold on corrugated cartons and waybill stock, and how do we check that before a full run?

76g Top-coated Thermal Paper is specified for the express & logistics waybills field, which does not mean every substrate in it. Direct thermal prints without a ribbon, but heat, sunlight and plasticiser contact keep developing the coating. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is S26741 (76g Top-coated Thermal Paper, Hot Melt) rated for a cold store, and down to what temperature, and does the liner shift it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does S26741 (76g Top-coated Thermal Paper) have with Hot Melt adhesive, measured to which standard, and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Can we start with less than a full run of S26741 (76g Top-coated Thermal Paper, Hot Melt), and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick S26741 (76g Top-coated Thermal Paper) over SR0041, and which holds better at the edge?

S26741 runs Hot Melt adhesive on Blue Glassine Liner, while SR0041 runs Low-tack Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.