95μm Thermal Film Cold Chain & Fresh Food Label Material — S86301

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Thermal film face — combines print convenience with durability

FAQ

Is Freezer-grade adhesive on S86301 (95μm Thermal Film) enough for frozen cartons and chilled packs, or do we need higher tack, and what would you send as a sample?

95μm Thermal Film is specified for the cold chain & fresh food field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

At what temperature do we apply S86301 (95μm Thermal Film, Freezer-grade), and what can it take afterwards, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

How much tack does S86301 (95μm Thermal Film) have with Freezer-grade adhesive, measured to which standard, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Does the 62g White Glassine liner add lead time to a S86301 (95μm Thermal Film, Freezer-grade) order, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is S9RG31 a drop-in alternative to S86301 (95μm Thermal Film), and which holds better at the edge?

S86301 runs Freezer-grade adhesive on 62g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.