95μm Thermal Film Cold Chain & Fresh Food Label Material — S8AG30

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Thermal film face — combines print convenience with durability

FAQ

We print 95μm Thermal Film on 60g White Glassine — will that hold on frozen cartons and chilled packs, and does the liner change the answer?

95μm Thermal Film is specified for the cold chain & fresh food field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

If our line runs at -18 °C, does S8AG30 (95μm Thermal Film, All-weather Low-temperature) need a slower speed to wet out, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 95μm Thermal Film and All-weather Low-temperature combination report for tack and peel, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

S8AG30 (95μm Thermal Film, All-weather Low-temperature): what is the shortest lead time you can hold to, and at what quantity, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick S8AG30 (95μm Thermal Film) over S9RG31, and does the price differ much?

S8AG30 runs All-weather Low-temperature adhesive on 60g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.