75μm Thermal Film Express & Logistics Waybills Label Material — S9CG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• General-purpose water-based adhesive, compatible with a wide range of substrates
• Thermal film face — combines print convenience with durability

FAQ

Is 75μm Thermal Film the right face for corrugated cartons and waybill stock, or do we need a film instead, and what would you send as a sample?

75μm Thermal Film is specified for the express & logistics waybills field, which does not mean every substrate in it. Thermal film puts the heat-sensitive coating on a film base, so it also resists water. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does the 62g White Glassine liner on S9CG31 (75μm Thermal Film, General-purpose) change how it behaves when applied cold, and is there a written figure for it?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Do the peel figures for S9CG31 (75μm Thermal Film, General-purpose) change with the 62g White Glassine liner, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

S9CG31 (75μm Thermal Film, General-purpose): what is the shortest lead time you can hold to, and at what quantity, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is S9RG31 a drop-in alternative to S9CG31 (75μm Thermal Film), and which holds better at the edge?

S9CG31 runs General-purpose adhesive on 62g White Glassine Liner, while S9RG31 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.