China sourcing partner for self-adhesive label materials ·Lower selection cost, lower procurement cost, lower sourcing risk
Get a quote or samplelaotumail@gmail.com
BLBoren Label MaterialsSourcing partner · China
中文Get a quote

Label Material for Hot Cups & High-Temperature Use

Hot-fill and high-temperature environments require adhesives and facestocks that resist heat and flow.

5 constructions available for this field. Face materials used:

Thermal PaperThermal Film

Constructions forHot Cups & High-Temperature

Open any product code for the full specification and the verified case where available.

Filter in catalogue
S11501 70g Top-coated Thermal Paper label material S11501 70g Top-coated Thermal Paper · Hot Melt 62g White Glassine Liner · Back Printing Hot Cups & High-TemperatureHot Melt S14041 70g Top-coated Thermal Paper label material S14041 70g Top-coated Thermal Paper · Hot Melt 40g White Glassine Liner · Back Printing Hot Cups & High-TemperatureHot Melt S91311 75μm Thermal Film label material S91311 75μm Thermal Film · Hot Melt 50g White Glassine Liner · Back Printing Hot Cups & High-TemperatureHot Melt★ Verified S97151 75μm Thermal Film label material S97151 75μm Thermal Film · Standard 50g White Glassine Liner · Back Printing Hot Cups & High-TemperatureStandard S11500 70g Top-coated Thermal Paper label material S11500 70g Top-coated Thermal Paper · Hot Melt 60g White Glassine Liner · No Back Printing Hot Cups & High-TemperatureHot Melt

What usually decides the choice

For hot cups & high-temperature the three variables that most often cause a complaint are substrate surface energy (whether the adhesive can wet out), temperature and moisture at application and in service, and line speed (whether the liner releases cleanly at your press speed). Selecting on face stock alone is where most specification errors start.

FAQ

Where do Hot Cups & High-Temperature label jobs most often go wrong?
Three failures repeat on paper cups and hot-fill containers: the cup wall is 85–95 °C at the rim when the label goes on; a paper face dries out and curls at that temperature; steam from the fill condenses under the front edge.
What combination works for Hot Cups & High-Temperature — paper, film, or both?
In this field the catalogue concentrates on Thermal Paper, Thermal Film: 5 of the 5 constructions here use one of those faces, and Hot Melt is the most frequent adhesive. That pairing is chosen for 85–95 °C cup walls. Anything outside that list is a development item, not a catalogue substitute.
What paperwork can you supply for Hot Cups & High-Temperature labels?
Each lot ships with a TDS for the construction and a lot number on the reel label. We also issue a written statement of the adhesive chemistry so your own REACH or FDA assessment can be completed. For food contact we can declare the face and adhesive only, not your printing ink.
What roll format and line speed does Hot Cups & High-Temperature material run at?
Jumbo roll or slit roll, wound to your core and width, in 500 ㎡ lots. We do not publish a single line-speed figure, because release force depends on your die, web tension and dwell. Send your m/min and we cut a trial roll to match.
What MOQ applies to Hot Cups & High-Temperature labels?
The catalogue MOQ is 500 ㎡ per construction; below that a coating run is not economic, so we quote a share of a scheduled run instead. Lead time is 15 days after artwork and roll-format approval, ex-works Guangzhou. It can be consolidated with other codes on the same shipment.
What is the step-by-step for approving Hot Cups & High-Temperature material?
Send substrate, line speed and roll format in the brief; we shortlist two or three constructions, then cut a trial roll for approval on your own press. Production starts only after you sign off that trial, and inspection happens before dispatch.

Send us your hot cups & high-temperature label brief

Include the substrate, the fill or storage temperature and your line speed.

Request a quotation Browse 347 specs