80g Coated Paper Cold Chain & Fresh Food Label Material — A8LG31

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Coated paper face — excellent print reproduction for fine graphics
• Verified by customer mass production

FAQ

What substrates is A8LG31 (80g Coated Paper) built for, given it runs a Freezer-grade adhesive, and does the liner change the answer?

80g Coated Paper is specified for the cold chain & fresh food field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is A8LG31 (80g Coated Paper, Freezer-grade) rated for a cold store, and down to what temperature, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What do the 80g Coated Paper and Freezer-grade combination report for tack and peel, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

Is A8LG31 (80g Coated Paper) kept in stock, or is it produced to order with Freezer-grade adhesive, and does a slit roll change it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Both look like the same face stock, so why pick A8LG31 (80g Coated Paper) over AR0011, and which holds better at the edge?

A8LG31 runs Freezer-grade adhesive on 62g White Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.