80g Coated Paper General Standard Label Material — ACMG71

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Hot melt adhesive system — good heat resistance for demanding environments
• Coated paper face — excellent print reproduction for fine graphics

FAQ

What substrates is ACMG71 (80g Coated Paper) built for, given it runs a Hot Melt adhesive, and which document states that?

80g Coated Paper is specified for the general standard field, which does not mean every substrate in it. Coated paper takes fine print and varnish well, and it takes up moisture at the cut edge. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What service temperature range applies to ACMG71 (80g Coated Paper) with Hot Melt adhesive, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

What are the initial tack and 90° peel figures for ACMG71 (80g Coated Paper, Hot Melt), and what substrate was it measured on?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to ACMG71 (80g Coated Paper) with Hot Melt adhesive, and what is the lead time after approval, and is export packing included?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between ACMG71 (80g Coated Paper) and AR0011, and can we get both as samples?

ACMG71 runs Hot Melt adhesive on 80g White Glassine Liner, while AR0011 runs Removable on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.