50μm Clear PET Film Electronics & Asset Labels Label Material — D51201

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• PET film face — dimensional stability and good heat resistance
• Verified by customer mass production

FAQ

Can we apply D51201 (50μm Clear PET Film, Low-odor / Residue-free) to anodised aluminium and powder-coated panels straight off the roll, and how do we check that before a full run?

50μm Clear PET Film is specified for the electronics & asset field, which does not mean every substrate in it. PET film holds its dimensions and stiffness at higher temperatures than PP or PE. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Does D51201 (50μm Clear PET Film, Low-odor / Residue-free) on 80g White Glassine hold its service range after a week at 60 °C, and how do we verify it on the line?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the D51201 (50μm Clear PET Film, Low-odor / Residue-free) data sheet state its peel condition on a 80g White Glassine liner, and how do we reproduce the test?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does D51201 (50μm Clear PET Film, Low-odor / Residue-free) start at on a 80g White Glassine liner, and does a trial roll count, and can a trial roll count towards it?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between D51201 (50μm Clear PET Film) and D57631, and which one should we trial first?

D51201 runs Low-odor / Residue-free adhesive on 80g White Glassine Liner, while D57631 runs Low-temperature on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.