100μm Inkjet Bright White BOPP Film Digital Inkjet & Laser Label Material — F11891

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Synthetic paper face — water resistant, tear resistant, good stiffness

FAQ

Can we apply F11891 (100μm Inkjet Bright White BOPP Film, Standard) to laser and inkjet printed sheets straight off the roll, and how do we check that before a full run?

100μm Inkjet Bright White BOPP Film is specified for the digital inkjet & laser field, which does not mean every substrate in it. Synthetic paper prints like coated paper and survives water and tearing like a film. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to F11891 (100μm Inkjet Bright White BOPP Film) below 60 °C with this Standard adhesive, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Where does the F11891 (100μm Inkjet Bright White BOPP Film, Standard) data sheet state its peel condition on a 62g White Glassine liner, and is that a 20 min or 24 h value?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What quantity does F11891 (100μm Inkjet Bright White BOPP Film, Standard) start at on a 62g White Glassine liner, and does a trial roll count, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F11891 (100μm Inkjet Bright White BOPP Film) and F10050, and which holds better at the edge?

F11891 runs Standard adhesive on 62g White Glassine Liner, while F10050 runs Low-odor / Residue-free on 36μm Clear PET Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.