60μm Bright White BOPP Film HDPE Bottles Label Material — F118K1

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Pearl BOPP face — good stiffness, bright appearance, crease resistant

FAQ

Is Standard adhesive on F118K1 (60μm Bright White BOPP Film) enough for HDPE bottles and closures, or do we need higher tack, and does it still hold on our own substrate?

60μm Bright White BOPP Film is specified for the hdpe bottles field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

What happens to F118K1 (60μm Bright White BOPP Film) below 60 °C with this Standard adhesive, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Which standard are the tack and peel values for 60μm Bright White BOPP Film on 120g White CCK reported to, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

How many square metres of F118K1 in 60μm Bright White BOPP Film makes a minimum run, and what starts the clock?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

Is F11801 a drop-in alternative to F118K1 (60μm Bright White BOPP Film), and which holds better at the edge?

F118K1 runs Standard adhesive on 120g White CCK Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.