60μm UV Inkjet Bright White BOPP Film Digital Inkjet & Laser Label Material — F12891

Construction

The three functional layers of this item. Selecting on face stock alone is where most specification errors begin — the adhesive and liner decide how it behaves on your press.

Product features

• Standard water-based adhesive with stable, consistent performance
• Pearl BOPP face — good stiffness, bright appearance, crease resistant
• Verified by customer mass production

FAQ

Would 60μm UV Inkjet Bright White BOPP Film on a 62g White Glassine liner be the right call for laser and inkjet printed sheets, and how do we check that before a full run?

60μm UV Inkjet Bright White BOPP Film is specified for the digital inkjet & laser field, which does not mean every substrate in it. Pearl BOPP gives an opaque pearlescent white without a primer. Where the surface is recycled or carries mould release, treat the first roll as a trial.

Is F12891 (60μm UV Inkjet Bright White BOPP Film, Standard) rated for a cold store, and down to what temperature, and what happens at the low end?

No application-temperature figure is released for this construction, and we will not invent one. Adhesive wet-out decides the low end, and that depends on your line speed and the temperature of the bottle. The declared test condition is 23±2 °C / 50±5 % RH, and a trial roll shows where your own line sits.

Can you give tack and peel for F12891 (60μm UV Inkjet Bright White BOPP Film, Standard) in N rather than a vague high-tack claim, and which document states it?

No tack or peel figure is released for this construction, so we will not quote one. We report tack to FINAT FTM 9 by the ball method and 90° peel to FTM 2, at 23±2 °C / 50±5 % RH.

What MOQ applies to F12891 (60μm UV Inkjet Bright White BOPP Film) with Standard adhesive, and what is the lead time after approval, and can it be pooled with other codes?

Minimum order quantity is 500 ㎡ and lead time is 15 days after artwork and roll-format approval. A trial roll for press approval can be arranged before the production run starts. Shipment is ex-works Guangzhou, and it can be consolidated with other codes on the same order.

What is the difference between F12891 (60μm UV Inkjet Bright White BOPP Film) and F11801, and can we get both as samples?

F12891 runs Standard adhesive on 62g White Glassine Liner, while F11801 runs General-purpose on 62g White Glassine Liner. The difference is the adhesive chemistry, which decides edge lift and high-speed behaviour more than the face does. Compare the two technical tables above, then test both on the same substrate.